Fencing & Your Generac Generator

More and more Homeowner’s Associations (HOA’s) are requiring generators and HVAC equipment to be fenced or concealed in some fashion for street appeal aesthetics. Suburban Homeowners use screening and fencing for curb appeal, resale value, and security. Whatever reason fencing and screening is used, it may hinder your service, repairs, as well as ventilation for proper operation of your equipment.

Service Technicians need a minimum of three (3) feet on all sides for service and repair maneuverability. This affords technicians space to tear down and replace parts, filters, batteries and change oil with ease and efficiency. If you are unable to move around freely inside your fencing, neither can your technicians. Most repairs are based on time on site. If your technician cannot move easily in the area the repair can take longer and cost you more.

If screening or fencing does not have an openable / gated access, removal is their only option for access. It is inconvenient for a homeowner to be required to dismantle screening / fencing for service. Most service companies frown on, or refuse service if their technician is required to remove bolts, etc. for access due to liability and damage concerns. Fencing and screening that is too close to your generator can allow debris like leaves, grass, limbs, etc. to build up inside and pose a fire hazard as well.

When planning to fence or screen your generator, keep in mind that local and national code required three (3) foot of clearance on front and both sides of your outdoor equipment, minimally. Adding a latched gate for access makes it easy for all service provides to assist in your needs.

Keep your generator safe, secure and serviceable with these helpful tips!

IMPORTANT: PHOTOS IN THIS BLOG ARE EXAMPLES AND SHOULD NOT BE DUPLICATED FOR THE SAFETY OF YOUR GENERATOR AND HOME.